You are currently browsing the tag archive for the ‘moving’ tag.
Good news: I am all moved into my new place! (More about that on the bottom.) Bad news: It’s a gigantic mess still. Good news: IT’S MINE ALL MINE (well, also Joe’s since he lives there too). Bad news: My camera sd card and card reader appear to have gotten lost in the shuffle. Good news: I took these pictures of this sweater before I moved.
Pattern: Shalom Cardigan
Yarn: Noro Silk Garden (about 3/4 of a skein) and recycled wool
Needles: US 9/5.5mm I think
Mods: Long sleeves, different color yoke and bottom band, different CO and sleeve numbers… I used the pattern as a guideline, basically.
Once again, I’m playing along with IntSweMoDo, wherein I try to knit 12 sweaters in a year (because definitely I need 12 more sweaters, but shhh). For those following along at home, this is my first sweater of 2014. It was cast on in the tail end of 2013 (December 30, according to Ravelry), but mostly I knit it in January of 2014.
The pictures aren’t modeled because it’s BLOODY COLD OUTSIDE. It fits a little differently on me since I’ve yet to adjust Elizabeth to my current office-job-having bad-food-eating not-exercise-doing weight, but you get the idea. It’s actually still pretty baggy on me, which was sort of the idea anyway, so it works. Unless I shuffle the neckline around, the end of the yoke tends to hit at the nipple line, so that’s a problem, but I can deal with it.
All in all, I’m pretty chuffed with it, and I’ve been wearing it quite a lot since I bound it off.
Now, more about the apartment: My stuff is all moved in and it’s even mostly organized, but there are still a bunch of bags and boxes of stuff that need to be put away. And a bunch of stuff I have to get that I didn’t know I was going to have to get (mostly because the thought never occurred, not that I thought the apartment would have them) like clothes hangers and cleaning solutions. I had to run out early on Sunday morning to buy a shower curtain cause I forgot that I would need one.
I fully intend to snap some pictures of my crafting corner once I get it all set up. I need to get at least one more bookshelf for yarn storage, but my mother has an extra one she might bring up this weekend. It’s a work in progress and there’s a ton of stuff left to do, but things are moving along. And most importantly I HAVE MY OWN KITCHEN. Excite.
Project Number One in the latest batch of things for AnnaMarie: Thrummed mittens!
Pattern: Thrummed Mittens, Stuffed Mittens … or Fluffies
Yarn: CorgiHillFarm hand dyed DK Polworth
Fiber: Falkland (I’m pretty sure it’s Ashland Bay)
Needle: US 6/4mm dpns
Mods: I used the pattern as more of a guideline. I increased after the ribbing (because I wanted the cuff to fit securely and with my gauge, there was no way 36 stitches was going to be big enough), I did my own thing for the thumb and the top decreases.
THEY’RE SO FLUFFY I’M GONNA DIE.
It absolutely does not get cold enough here to justify making and wearing thrummed mittens for myself, but after making and trying on these ones, I am definitely making a pair. The Falkland makes them super soft inside and they’re hella warm, and I love them. I need them. NEED.
As mentioned above, I did some heavy modifying to the pattern. I mostly just used the thrumming chart, to be honest. I was a little disappointed the pattern did not contain instructions for making thrums, but I guess it calls for a commercial pencil roving, so you don’t really need one. I found this explanation by Stephanie Pearl-McPhee really helpful, though I think I made mind a bit longer as I was worried they would slip out of the knitting. All in all, though, the knitting and thrumming was super simple, and they kept me entertained the whole time I was working on them.
In life news: I am moving this Saturday, OMG. Signing the lease Friday afternoon. Y’all, I am SO, SO ready for this. Well, I’m not, I actually have a ton more packing to do plus I have to reserve a UHaul in order to move my bed/desks/bookshelves plus I have to buy internet (oh my god, cable companies are such a racket and internet is way more expensive than it should be). But still. It’s totally happening. EXCITE.
I was definitely a doll kid when I was little. I had baby dolls and stuffed animals and Barbies, and I loved making up scenarios for them. I loved dressing up Barbie in all sorts of clothes. I had a hot pink Barbie car at one point, but I don’t think I ever had a big dollhouse. I’d have loved one when I was kid; hell, I’d love one now. It’s less about dolls now and more about a deep love of miniatures, but still. I don’t have a Barbie Dream House or any Barbies anymore, but I do have some yarn that brought Barbie instantly to mind.
I spun this up on Alexandra, my wheel, in just a couple of hours. Speaking of the wheel: about a month ago, I took a spinning lesson at Uniquities, my super fabulous Local Yarn Shop. I wanted some Official Instruction on how to set up the drive band and tensioning and stuff and, if there was time left over, to learn a little about corespinning. We decided to set up the wheel as a double drive. The difference between the bobbin ratio and the flyer ratio is pretty small, but it’s big enough to work. And I can finally tension everything properly, so plying isn’t a mess of too much twist. Anyway, I managed to get through some practice corespinning and moved over to the BFL I had started, but the drive band kept popping off! Because the wheel is a bit old and a bit wiggly, things tend to move around. The other day I really wanted to do some spinning, so I sat down and studied the situation and (I think) managed to mostly fix it so that doesn’t happen any more.
All that to say I spun up the Barbie yarn in no time flat and had absolutely zero tension problems, and it was wonderful.
The fiber in question is merino that I bought from the Spinner’s Hill booth and Maryland Sheep and Wool. It used to look like this:
SO PINK. I used a short forward draw and it just flew by. It’s a two ply and the bobbins matched up almost perfectly, even though I didn’t actually divide the fiber until I was about halfway through the first half. I knew I’d purchased four ounces, so I just measured off about two ounces and set it aside for the second bobbin. There were few enough singles on the second bobbin that I could wind them off into a modified Andean bracelet and continue plying with no real break in the yarn.
I got a total of 188 yards of about worsted weight, which is pretty typical. I actually managed to get all 4 ounces of finished yarn onto one bobbin while I was plying, and I have no idea how I accomplished that. I really love the finished yarn though. It’s pretty soft and super squooshy. Nice and dense. It will probably become mittens at some point. With that much bright pink, it’s perfect for cheering up dreary January days.
I really want to pull out some more merino and spin something very similar to this. This ends up being my default spin. I sometimes wish I could spin thinner and get more yardage (because fiber is expensive, and I want to get maximum knitting out of it), but the truth is, I just prefer knitting with worsted weight yarns. I’m going to try and remember this and not be too worried about yardage and getting the most bang for the buck. I tend to spend less than $20 (ideally under $15; I think this was $10 or $12) per 4 ounces, and getting to spin it, knit it, and then wear the FO is plenty of bang for that buck.
In life news: I am moving! Joe and I finally found a place of our own. It’s a little one bedroom and it’s a little more than we wanted to pay, but it’s a space of our own. We’ll sign the lease next week sometime and move in February 1st. I am SO EXCITED ABOUT THIS, you guys. It’ll be a little cramped, I think, but we’ll have our own kitchen and balcony and WINDOWS. LOTS OF WINDOWS.
There’s some furniture I need to get (some bookshelves for yarn storage, mainly; I’d like the Ikea Expedit ones, but they’re a bit pricey) and a LOT of packing to do, but it’s finally happening.
Hello from my apartment in Northern Virginia where I am all moved in. I want to show you pictures of the place but it’s kind of a disaster area at the moment. Lots of organizing to do. Anyway, in between that, I made a bathmat:
Pattern: By Your Bed/Bathmat/Doormat
Yarn: Navy (it’s darker than the picture shows) t-shirt yarn/tarn I got in a swap on Craftster a while ago. I used 7/8 balls. (The last might become a dishcloth if I ever find it.)
Hook: GIGANTIC plastic 15mm hook
Mods: I added an extra row of shells/3dc in ch1 sp.
Woo! Pretty simple project; went by super quickly. And now we have a pretty bathmat.
This next week will likely be spent cleaning and organizing and a little bit of job hunting. I’m applying to the Fairfax school system, which I likely won’t get but would be awesome if I did. Cheers!
You guys, packing is stressful. I have to cull everything I own until I can fit it all in a minivan, and I have a lot of stuff. A LOT of stuff. Mostly yarn and clothes. I have four plastic bins and a cardboard box full of yarn, plus I have yarn or unravels-in-progress stuffed in every tiny nook and cranny of the rest of the bags and boxes and bins. Probably 80% of my stuff is either craft supplies or clothes, both of which are things I enjoy frequently and can get for very cheap. The other 20% is books. Maybe there’s 1% “other stuff”. Mostly clothes and books and craft supplies and books. I like books.
ANYWAY, I made a sweater. It looks like this:
(Do ignore my blurry arm meat there.)
Pattern: My own. Thinking about writing it up.
Yarn: Recycled mercerized cotton from a Ralph Lauren pullover (I have lots left)
Needles: US 3/2.75mm straights and a US 5/3.25 circular for the ruffles
Please appreciate that it is approximately five hundred degrees outside, into which I ventured to get pictures of this sweater. (The actual temperature is like 97 but at a certain point it all just feels HOT.) I jumped into the pool right after (I changed first) but still. HOT.
I really like knitting summer sweaters and tanks. They’re fast and I can wear them pretty much year round (though with a shirt under for the winter), unlike a sweater, which is really only good when it’s cold enough.
So I love this thing. I knit it in a strip like the Carousel socks from Knitty that I made a couple weeks ago. I do love the strip construction. It keeps my attention for the whole project so I never get bored like I do with things that are just long rows of stockinette.
In further life news, if I have no said exactly so yet, I will be moving to Fairfax on Tuesday. You might not hear from me for a little while after that while I settle in/job hunt. I’ll almost certainly be on Twitter frequently though, so feel free to drop me a line. I almost always respond on Twitter. I love Twitter.
Happy Independence Day, Americans! I’m safely back in Virginia Beach for the week and am knitting again. I only have two things on the needles and they happen to be red, white, and blue!
There’s the Roundabout sweater:
I’m just over the bust at this point so I’ll need to figure out how I want to do sleeves/straps.
Then there’s my TARDIS socks, which are half done:
I haven’t yet cast on for the second sock, so I guess these aren’t really OTN per se, but I’ll get the other one on there soon.
In life news: Much of this week will be spent packing. I’m hoping to have an actual moving date of Monday for when I’m going up to Northern Virginia to move in with my boyfriend. I’ll keep you posted on the job status but for right now, my only income is my Ravelry pattern store. I’ll start looking in depth when I get up there.
But today’s for drinking and knitting and fireworks and whatall. And watching Independence Day, natch.
I’m almost finished with Bigger on the Inside and the first striped sock, but I am currently thinking about moving up to Fairfax at the end of the month. I have too many things, especially craft books. Do you like craft books? Any of the following can be yours for just the price of shipping (otherwise they’re going to the thrift)
Act now! (And if anyone wants a metric shit ton of straight knitting needles, I have those too)
Stitch, Brinn, Stitch! 